Connect with us

Hi, what are you looking for?

Business

ASH Automated Packaging Systems Reports – Multifeeder at PACK EXPO 2010!

09/14/2010

Pack Expo 2010 News by ASH Automated Packaging Systems – Multifeeder has given us the inside scoop on their booth at the Pack Expo 2010. The will be displaying 4 systems this year.

 

System 1: Turnkey tipping system.

The system will start by an MFT 350XED Industrial Performance Friction Feeder placing a base product onto their VTC 3000-550 Vacuum Track Conveyor. Once the base product is on the VTC it will be held in position through the remainder of the conveyor with a continuous vacuum supply through the belts of the conveyor. The base product will then get glue applied from a hot melt system. After glue is applied the glued base product will continue to travel down the base conveyor and pass beneath an MFT IP 250ED Industrial Performance Tipping unit which will accurately place an onset patented Continuous Accutipping Controller with encoder feedback. The product will be placed very accurately at high speed an during ramp up/down or any line speed variations. The product will then enter a plow fold section where the product will be folded in half encasing the tipped product. After the product has been folded a label will be applied by an MFT 100HS High Speed Label Applicator. A barcode reader will be mounted over the base to detect a printed barcode and verify it matches a preset code. If the barcode does not match, is missing or is a bad read the product will be automatically rejected.

System 2: Automated labeling system with automated product transfer.

This system will begin with an MFT V 250ED Signature Series Friction Feeder replicating and existing system in a factory that would automatically transfer product from existing equipment into the Multifeeder equipment. Once the product is on the Multifeeder equipment it will be buffered into a rear APL hopper with controller. The APL 1000-550 will automatically fill the in feed hopper of the MFT IP 550SLD Industrial Performance Friction Feeder. As the rear APL hopper empties or fills up a controller will pause and start the labeling line. The MFT IP 550SLD will separate and feed the product from the stack into the in feed hopper and present to an MFT PA 15 Print and Apply Label Applicator. The MFT PA 150 will print a label onto black label stock and apply to the moving base product as it travels through the discharge of the Multifeeder. As the product exits the discharge of the MFT IP 550SLD they will be accumulated in a catch tray.

System 3:

Multifeeder will have their new Signature Series Multifeeder which is a cost effective feeder for those with slower less demanding applications. This will be a standalone unit feeding into a catch tray.

System 4:

An Industrial Performance Multifeeder with Flexible Discharge to feed products from a horizontal position to a vertical position. This feeder will also be a stand alone unit.

For more information on the Multifeeder products check out their website at www.multifeeder.com or contact us at customerservice@ashpackaging.com.

You May Also Like

Business

State would join dozens of others in enacting legislation based on federal government’s landmark whistleblower statute, the False Claims Act

press release

With a deep understanding of the latest tech, Erbo helps businesses flourish in a digital world.

press release

#Automotive #Carbon #Canister #Market #Projected #Hit #USD New York, US, Oct. 24, 2022 (GLOBE NEWSWIRE) —  According to a comprehensive research report by Market...

press release

Barrington Research Analyst James C.Goss reiterated an Outperform rating on shares of IMAX Corp IMAX with a Price target of $20. As theaters...